aquaMAX basic
Is the best solution for producing primary grade water or general laboratory grade water at two types of flow-rates of 10, 20 liters per hour. It offers you convenient operation and reliability at a low operating cost. AquaMAX Basic System uses a RO(reverse osmosis) process to remove particles, inorganic salts, organic material and bacteria from tap water. The tap water is carried through a pre-filter to remove the larger particles and the pre-filtered water flows into a carbon filter housing to remove chlorine.
High Quality Pure Water
- Automatic polishing system performs for 1 time every half hour
- After permeation of reverse osmosis membrane, the purified water contain less than 1% of the contaminants in the feed water.
- Carbon filter removes organics, inorganics and residual chlorine.
Cost Effective Water Purification System
- Low energy consumption and low water consumption
- Low maintenance cost
- no need of regular cleaning
Easy-to-use and convenient maintenance
- intuitive keypads and simple operation for you
- Pre-filter, active carbon filter and deionizer filter are placed the exterior for easy changing filters.
aquaMAX ultra
The best solution for High quality water preparation up to 18.2 MΩ/cm suitable for PCR, 2D electrophoresis and all critical cell culture. The instrument integrate a precise resistivity measurement which is able to sense the change in temperature dependent resistivity and temperature compensation.
LCD display : System conditions and function in viewable on 16 characters x 2 lines
0.22 μm filter(made of Durapore PVDF membrane, polycarbonate housing ) for final removing process of bacteria and particles.
HP-Pack(High Purity Pack) for organic-free water of maximum level of 18.2 MΩ/cm
Silent operation : Noise free under 40dB
Automatic water recirculation every 5 min.
Flow Rate : 0.8 ~ 1.5 l/min ( Depending on Hydraulic Pressure )
Resistivity : Up to 18.2 MΩ/cm
Power : 220/110V, 60/50Hz
System composition : Main system, HP-Pack(High Purity) cartridge, 0.22um final filter
Upgrade possibility:
UV sterilizer filter (High pressure sterilization filter)
UF filter for pyrogen removal
Application:
for HPLC, Cell Culture, Semi-Conductors, Pharmaceutical and other laboratory use.
aquaMax PRO
This new unit is buildt for industrial application where pure water / ultra pure water is needed
3 basic configurations are available with water grade I ; II or III and each basic module can be purchased in fotr versions, depending on the production rate needed.
The modules arevery compact and easy to install. Different control and safety functions are integrated into the unit and make the maintenance very easy.
