TS-100V Total Sulfur analyzer with Total nitrogen option

for liquid and gaseous samples

Certainly the most stable and performing sulfur and nitrogen analyzer you can find for laboratory use

Measurement sample             Liquid sample and gaseous sample (Use an option )

Measurement substance        Sulfur compound (except -SO3 and -SO4)

Analysis method                      Oxidative pyrolysis , ultraviolet fluorescence method

Sample injection method        Direct injection by micro syringe

Optional Model                        CRI-100 or Model ASC-150L is required.)

Furnace temperature              1000 - 1100 degre C (It can be set separately at sample injection part and combustion part.)

Measurement range                Refer to Table 10-1.

 

Measurement range

 Measurement 

 

Liquid sample :                            5 to 150µl,

Gaseous sample :                       1 to 10ml

Measurement time                       3  to 10 minutes every measurement

Detector output signal :               DC 0 to 1V

Balance input :                             RS232C

Gas                                               Oxygen gas ( Purity : more than 99.7 %, 0.3±0.1MPa )

                                                      Argon gas    ( Purity : more than 99.98%, 0.3±0.1MPa)

 

Standard use amount is as follows.

 

Oxygen gas :                                400ml/min

Argon gas (for analysis) :           500ml/min

Argon gas (for purge) :               650ml/min

Supply gas pressure change  : under ±2% in one day

Power TS-100V :                       AC 100/115/230/240V, 50/60 Hz, 1400VA
SD-100 :                                     AC 100/115/230/240V, 50/60 Hz, 52VA

 

Dimension and weight:

TS-100V :                                   Approx. 500(W)×360(D)× 430(H) mm,   Approx. 33kg
SD-100 :                                     Approx. 260(W)×360(D)× 430(H) mm,   Approx. 19kg
Gas Controller :                          Approx. 260(W)×260(D)× 110(H) mm,   Approx. 6 kg

 

Download

TS 2100 V catalogue