Are you using a Chromatography Data System (CDS) software?
HTA's autosamplers will not require any modification to your current habitudes: you will be able to operate as before the purchasing of the autosampler.
On HPLC side you will continue to setup and to start work sequences by your CDS. On autosampler side you just have to confirm the work sequence by the integrated Keypad, by HT-COMSFOT or by the same CDS (if it is supported).
Software for HT800L
HT-COMSOFT is the Microsoft Windows based software family dedicated to manage HTA autosamplers. The software may be run stand-alone or alongside other Windows softwares such as Chromatography Data System. Through HT-COMSOFT it is possible to: program the method files; program the sequence files; compile the sample list; print the contents of all files; control the setup, command a single injection...
Different Instruments are available at HTL :
- Basic instrument with the HT 300L and HT 310L
- HT800L the up to date instrument for performing sample injection
HT800L is a compact and versatile autosampler for highly precise injections into HPLC, UHPLC and LC/MS systems.
High sample throughput, Repeatability, Easy-to-use and Versatility distinguish HT800L and make it the best choice for your liquid chromatography applications!
High sample throughput. It can handle up to 120 vials per run and it can work with different kind of SBS plates (micro, shallow, deep).
Removable racks assure easy and quick sample loading and the polarization on racks assures error free procedure.
Low cycle time. The high speed operation is coupled to a sampling chamber sensor, to ensure that when the door is open a deboosting protection is activated in order to guarantee the operator safety.
Repeatability. HT800L provides excellent analysis efficiency through an accurate syringe system that assures high performance with every vial/plate configuration unlike pressure based systems.
Programmable double-step washing (by the system liquid and by an aggressive solvent), internal and external needle washing and total line washing ensure a minimal carry-over.
Full loop is performed with very high accuracy values, while partial loop and microliter pick up assure sample saving. The variable fill speed and the viscosity delay allow a wide range of sample viscosities while programmable sampling depth assures high-sample recover capacity.
Easy-to-use. Pc interface software has been designed to create methods and sequences in a simple way. An additional keypad has been designed for every operation that would be uncomfortable to do by a Data System: for wake-up and shut down maintenance, extra washing and line rinsing. Finally lights inside sampling chamber assure an easy visual contact with samples during the operations.
Versatility. HT800L claim is "Easy for routine, Rich of features for research".
In
the case you need there are many advanced options on which you can act: up to 3 reagent
additions, each one with optional mixing and washing steps that enable HT800L to
become quite popular between research labs. Users that need just routine don't need
to worry about these advanced parameters, they need to set just few parameters to
create a method.
Dilution, derivatization, pH spiking and internal standard addition are available within the standard version: no extra costs required. These operation can be performed in place or in an empty vial by sample dispatching (Quantified Preparative).
Need high levels of reproducibility and accuracy that an autosampler offers for your HPLC system, but do not run large sample batches?
HT310L is the answer.
HT310L is an HPLC autosampler derived from HT300L. This special version has a fixed tray that holds up to 10 sample vials and that gives the autosampler a very small footprint. Besides the price is very competitive, making HT310L a valid, efficient and not too expensive alternative to the manual injector. It uses a similar interface to the HT300L and can be interfaced with most HPLC systems.
The functionality and the ease of use remain the same as the 110 positions HT300L and the software control is available if required.
HT310L: it is the entry level version and can not be upgraded with a 110-position tray.
