YL 6500 GC      Optimized GC up to 3 columns /  injectors and detectors

                                 At  affordable price   

Best reproducibility for fast and high resolution analysis

 

Available in different configurations  with automatic APC  electronic ultra precise gas  flow control

It is fully functional as stand alone GC or controlled by the powerful  Clarity Chromatography Data system.

 

Wide choice of detectors:

• Flame ionization Detector ( FID )
• Thermal Conductivity Detector (TCD)
• Micro- ThermalConductivity Detector (uTCD) : MDL < 400 pg/ml
• Nitrogen Phosphorous Detector (NPD)
• Flam photometric detector ( FPD)
• Pulsed Discharge Detector (PDD)
• Electron Capture Detector (EC)
• Pulsed Flame Photometric Detector (PFPD)
• Up to  3 inlets installed
• Capillary Inlet : Split/split less inlet, Packed Inlet heating up to
• 450 degree C and  On column

Economical and safety functions

Safety function

 

TCD cell protection, detector on after flow check for reference and sample

Sensitive  leak detector

Automatic flame ignition after checking the FID temperature

Air and Hydrogen flow will be blocked automatically if auto-ignition is set at off

Easy to use , automatic flame ignition by APC for FID detection

In autonome configuration can store up to 30 different analytical methods

Bright color LCD display

Easy to read  5,7” display

All relevant information and control are clearly displayed

Time scheduling of system on/off, run time base up to 9999 analysis, Gas Saver function , Powerful control function for Flow and pressure control by Advanced Pneumatic Control (APC) four control mode can be used constant pressure,constant flow, programmed pressure (5 steps) or programmed flow ( 5 steps constant flow, programmed pressure (5 steps), programmed flow (5 steps).

Up to six APC can be installed in the instrument Perfect control of all parameters using dual CPU system

High performance column oven

Fast temperature ramps up to 100 degree / min

Fast cooling down rate , from 450 degree to 50 degree C in less than 6,5 min

Programing up to 25 ramp and 26 temperature steps

Up to 20  programming method

1 heated oven zone/ 3 heated injector zone,  3 heated detector zone/ 2 heated valve zone, 1 heated methanizer zone

 

Autosampler  for standard injection or with head space function available

HT300A

Capacity : 110 vials of 2 or 2,5 ml

Dual port injection

Pre and post injection wash

Air Bubble removal function

Up to 15 steps per sequences

Store up to 10 methods

Sample preparation:

Available modules:

Pyrolyzer, Pyroprobe 500 serie

Gas sampling valve

Purge housing 

HT 200H  Headspace

Capacity : 40 vials of 10 ml or 20 ml ml, nitrogen flush

Built in shaking function

6 position incubator

Oven temperature from 40 to 150 degree

Up to 15 steps per sequences

Waiting time between sample up to 99 min

Repeated injection up to 15

Store up to 10 methods, compatible with all major GC brand on the market